【Brand 】Citeli Coating Jigsaw Adhesive

【Model Number】7032A

【Toxicity】Non-toxic and environmentally friendly

[Working temperature] 130℃-160℃

【Viscosity】16000±5000mpa.s at 150℃

【Curing time】 8-12 seconds

【Softening degree】88±5℃

[Main ingredients] Basic resin, tackifier, viscosity regulator and antioxidant

[Use] It is suitable for bonding between particle board, solid wood, MDF and decorative surface materials.

【Adapted machine】Domestic cladding machine, jigsaw machine.

[Storage conditions] Storage at room temperature


Use hot melt adhesive method and matters needing attention:

1. To understand and master the various models and technical performance (including technical parameters) of hot melt adhesives.

2. The temperature of the hot melt glue tank should be controlled within the operating temperature range.

3. Clean the preheated glue pot regularly to keep the glue pot clean.

4. Plates and edge banding materials should be protected from contamination.

5. The moisture content of wood should be around 8%-10%.

6. The amount of glue in the glue pot should be properly controlled. If the amount is too much, the glue will melt in turns, which will cause deterioration and aging, lower viscosity, and affect adhesion.