Minli New Materials (Guangzhou) Co., Ltd.

Tel:400-086-6586
Product Center Home > Porudcts


  • Product Details




model:7540A(High-quality medium-temperature edge banding hot melt adhesive)
Appearance: Oval particles, natural color, non-toxic and environmentally friendly。
Technical Parameters: The viscosity value is 25000 at 180 ℃ ± 5000mpa.s Density 1.13g/cm3
Softening Point85-95℃ Anti-hot spot>80℃
Operating parameters: Material humidity>15℃ Ambient temperature>15℃ Material moisture content8%-10% Glue tank temperature160-180℃
Operating temperature150-180℃ pressure3-5kg/cm3 Feeding speed>20m/min
Scope of use Suitable for curved edge banding machines, small automatic straight edge banding machines and portable edge banding machines; suitable for edge banding materials such as PVC, veneer, decorative paper, etc.;
Suitable for small automatic edge banding machines with a material feed speed of 8-12 m/min and manual edge banding machines with a material feed speed of 4-8 m/min;
product features: 1.Good transparency and low density。 2.High heat resistance, high strength, low temperature resistance, fast curing。
3.Good fluidity, thin glue line, low glue consumption。 4.A small amount of glue can also achieve a strong bonding effect。

Use hot melt adhesive method and matters needing attention:

1. To understand and master the various models and technical performance (including technical parameters) of hot melt adhesives.

2. The temperature of the hot melt glue tank should be controlled within the operating temperature range.

3. Clean the preheated glue pot regularly to keep the glue pot clean.

4. Plates and edge banding materials should be protected from contamination.

5. The moisture content of wood should be around 8%-10%.

6. The amount of glue in the glue pot should be properly controlled. If the amount is too much, the glue will melt in turns, which will cause deterioration and aging, lower viscosity, and affect adhesion.



相关产品

Tel

400-086-6586

Online Service