Model 7550 (conventional high temperature hot melt adhesive) | ||||||||
Product Nature: | The appearance is beige, non-toxic and environmentally friendly. Take ethylene and vinyl acetate as the main raw materials, add tackifying resin, accelerator, filler, etc.。 | |||||||
Technical Parameters: | 68000±5000mpa.s when the viscosity value is 200℃ | Density 1.28g/cm3 | ||||||
Softening point 95℃ | Anti-hot spot>80℃ | |||||||
Operating parameters: | Material humidity>15℃ | Environment temperature>15℃ | Material moisture content 8%-10% | Glue tank temperature 170-180℃ | ||||
Rubber roller temperature 180-210℃ | Pressure 3-5kg/cm3 | Feeding speed>15m/min | ||||||
Scope of use: | Suitable for large-scale automatic linear edge banding machines; suitable for edge banding materials such as PVC, veneer, decorative paper, etc.; | |||||||
Fully automatic edge banding machine/semi-automatic edge banding machine suitable for material feeding speed of 15-30 m/min | ||||||||
product features: | 1.Suitable for most large automatic edge banding machines; | 2.High cost performance, high strength, low temperature resistance; | ||||||
3.Good fluidity, thin glue line, low glue consumption: | 4.Fast curing, veneer |
Use hot melt adhesive method and matters needing attention:
1. To understand and master the various models and technical performance (including technical parameters) of hot melt adhesives.
2. The temperature of the hot melt glue tank should be controlled within the operating temperature range.
3. Clean the preheated glue pot regularly to keep the glue pot clean.
4. Plates and edge banding materials should be protected from contamination.
5. The moisture content of wood should be around 8%-10%.
6. The amount of glue in the glue pot should be properly controlled. If the amount is too much, the glue will melt in turns, which will cause deterioration and aging, lower viscosity, and affect adhesion.
上一个:7560-2W(white)
下一个:7560-2
Address : Jiajing Industrial Park, Lanshan Village, Xiancun Town, Zengcheng, Guangzhou
Tel : 400-086-6586
Fax :
Mobile : 400-086-6586 (Manager Wang)
Email :